Conductive Gel transmission gel for cavitation, Radio Frequency and ultrasound, Vacuum Negative

SKU: idcdtgel260

GTIN: 0712145866983

Available immediately
Delivery time: 2 - 4 Workdays (Other countries)

4,95 €

19,04 € per 1 l

incl. 19% VAT , plus (DHL)

Manufacturers recommended retail price: 9,95 €

(Save 50.25%, i.e. 5,00 €)

IDEALDERM CONDUCTIVE GEL is a very good high viscosity transmission gel for :

Cavitation
Radio Frequency and Ultrasound
Vacuum Negative Pressure
Echographie
...

Order in the next hours, minutes and seconds and your order will be send out today!

IDEALDERM CONDUCTIVE GEL is:

Push-vacuum-produced (and it is therefore free from air microbubbles)
Non irritant
Water-soluble
Drying resistant
Odourless
Easily removable
Alcohol Free

IDEALDERM CONDUCTIVE GEL does not:

Stain
Grease
Ionize
Oxidize over time

IDEALDERM CONDUCTIVE GEL does not contain any active ingredients that might damage the probe transducer.
The used dyes and preservatives are non-toxic and strictly in accordance with European regulations.

Crystal-looking, it is salt-free and without string effect. It does not contain formaldehyde and, thanks to its particular structure, it helps the probe moving, thus making the operator’s work easier.

IDEALDERM CONTACT GEL is push-vacuumproduced and it is therefore free from air microbubbles, fully hypoallergenic, watersoluble, drying-resistant, odourless, easily removable.

IDEALDERM CONTACT GEL doesn’t stain, does not grease, does not ionize and does not oxidize in time. It does not contain any active principles that might damage the probe transducer. The used dyes and preservatives are nontoxic and strictly in accordance with the regulations in force.

COMPLIANCE TO STANDARDS
Directive 93/42/EEC and amendments.
Class I medical device. Complies with microbiological quality requirements of EU Pharmacopoeia 5.1.4 for non-sterile skin preparation.

Presentation:
260 ml bottle.

Item weight:	0,29 kg
Content:	260,00 ml
Usage instructions:	See "How to use" tab
googlekat:	477

Generously apply the gel directly to the skin of the area to be treated / studied, then put the probe (or other suitable tool) in contact with it. Rinse with water after use. External use only.

There are no reviews yet.